| |
 |
| |
Site is under renovation. So please call us on 00 91 22 66359900 / 66356700
or Fax us on 00 91 22 22653459 / 26465223 for more details. |
| |
| Hydraulic Hacksaw Machine |
| |
|
SAW FRAME : This of regid construction & runs in
prismatic guide ensuring a parallel cut. This cut takes place on the draw
stroke & the hydraulically liften out of contact with the workpiece on the forward
stroke to prevent wear or the blade & can out metals of all kinds & strength.
FEED : Two levers are provided at the pot one regulators the rate of feed
while the other enabled the bow slide to be raised or forwarded hydraulically
bow raised automatically & motor Switched off on completion of the cut.
BED : The bed is of large proportion provided with guide ways for the vice
for clamping the material vice is of rigid constructional. One jaw remains fixed & the other can be adjusted according the
material to be cut.
|
 |
ELECTRICAL EQUIPMENT : A direct on line
push bottom starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as
the blade is clear from the work non productive time is reduced to minimum.
DRIVE : Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive
mechanism being totally enclosed.
SPEED : The incorporation of two-speed driving mechanism allows for the most suitable speed to selected
for material being cut.
COOLANT : The Coolant tank is totally enclosed in the machine base & a
Speed Pump supplies coolant to the saw blade through a stay put pipe &
top. |
| |
| SPECIFICATIONS |
| Size |
7" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
Stroke
(adjustable) |
5.5" |
5.5" |
5.5" | 5.5" |
5.5" |
5.5" |
5.5" | 5.5" |
5.5" |
| No. of Stroke per min. |
100 to 120 |
100 to 120 |
85 to 100 | 85 to 100 75 to 85 |
75 to 85 |
60 to 85 |
60 to 85 | 60 to 85 |
|
| Electric Motor Required |
1 H.P. |
1 H.P. |
1.5 H.P. | 2 H.P. |
2 H.P. |
3 H.P. |
5 H.P. |
7.5 H.P. |
7.5 H.P. |
| R.P.M. |
1440 |
1440 |
1440 |
1440 |
1440 |
1440 |
960 |
960 |
960 |
| Blade Size |
12" to 14" |
14" to 16" |
16" to 18' | 18" to 20" |
20" to 22" |
22" to 24" |
24" to 26" | 28" to30" |
30" to
32" |
| Capacity of Round Bar |
7" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
| Capacity of Square Bar |
5" |
51/2" |
8" |
10" |
11" |
13" |
14" |
15" |
18" |
| Weight (in Kgs.) |
350 |
350 |
525 |
530 |
700 |
700 |
1000 | 1100 |
1200 |
| Lenght |
38" |
38" |
46" |
50" |
54" |
58" |
58" |
66" |
66" |
| Breadth |
16" |
16" |
27" |
27" |
29" |
29" |
29" |
30" |
30" |
| Height |
44" |
44" |
48" |
54" |
54" |
60" |
66" |
72" |
72" |
| Approx. Net Wt. (in Kgs) |
400 |
400 |
550 |
600 |
700 |
800 |
850 |
900 |
900 |
|
|
| |
-
Machine supplied with suitable electric motor with starter, wiring, mechanical coolant
pump, set of V belt and vice - saw blade in extra cost
-
Machine upto cutting are 16" are single hydraulic unit and 18", 20", 24" are having two hydraulic
units
|
 |
| © Copyright 2004, Atlas Machines (India). Revised 2008. All rights reserved. |
